Ford F-150 Raptor (2017)
Sale price: US $91,999.00 Make an Offer
| Condition: | Used | Year: | 2017 |
| VIN : | 1FTFW1RG9HFC03413 | Mileage: | 22000 |
| Engine: | 3.5L V6 EcoBoost High Output -inc: auto start/stop | Options: | ENGINE: 3.5L V6 ECOBOOST HIGH OUTPUT, 4-Wheel Drive, Leather Seats, Sunroof |
| Model: | F-150 | Power Options: | Electric Power-Assist Speed-Sensing Steering, Air Conditioning, Cruise Control, Power Locks, Power Windows, Power Seats |
| Sub Model: | Raptor | Transmission: | Automatic |
| Interior Color: | Black | Fuel Type: | Gasoline |
| For Sale By: | Private Seller | Exterior Color: | White |
| Make: | Ford | Trim: | Raptor |
| Drive Type: | 4WD | Vehicle Title: | Clean |
| Body Type: | Crew Cab Pickup | Warranty: | Unspecified |
Glendale, California, United States
Vehicle description
Please contact Matt @ 9144825224 txt/call
Year: 2017
Ford Raptor F150
Vin: 1FTFW1RG9HFC03413
Miles: 24,000
802A loaded ( sunroof etc ).
The truck is in pristine condition, and was built with no expense spared; this isn"t your typical raptor that most people modify to go overlanding, this is a full blown chase truck build-built by Brenthel Industries in Temecula. The quality of the build and fabrication would cost $100k to replicate in parts + labor excluding the cost of the truck. Currently only 24,XXX miles.
The following upgrades were made to the truck, all built by Brenthel in Temecula:
Suspension:
Baja Kits 3.0 Raptor 4wd Race Kit
-King 3.0 raptor specific coilovers
-King 3.0 raptor specific bypasses up front
-King 2.0 air bumps up front
-Baja kits boxed UCA with Uniball- Full heims
-Baja kits boxed LCA with Full heims
-Baja kits Gusseted spindles
-Deaver race pack leafs
-King 2.5" air bumps
-King 3.0 rear reservoir bypasses
Wheels:
-Method 105 17" beadlocks
-Basically new BFG MT"s; stock size, 35x12.5x17
Performance:
-Alcon big brake kits FRONT AND REAR
-Whipple performance CAI with Tune (+200lb ft of torque)
-Cat back exhaust, stainless mufflers with turn-downs in front of the rear axle.
Appearance:
-Full carbon fiber front fenders and bedsides, wrapped in matte black. Paint underneath is glossy and in good shape.
-Custom red/black metallic paint job
-Rear tire cage with Pro-eagle; carries two spares
-Full dynamat interior all around
-Full DOM roll cage, wrapped in alcantara to match the interior.
-Alcantara headliner
-F150 Platinum front seats (Heated, cooled and massaging)
-PRP Harnesses
-ADD Off Road front and rear bumpers and rock sliders
-Baja Designs ONx6 Light bar in front bumper
-4x Baja Designs LP9"s up front
-2x Baja Designs XL ditch lights with brackets
-full metal skid belly plate
-Rear mounted Baja designs lights
Misc:
-Race radio
-CB radio + megaphone & police sirens.
-Built in air-compressor
-Fully equipped with Lowrance HDS multifunction GPS ( X2 )
( one 16” lowrance HDS mounted on passenger side. one lowrance HDS 7 mounted on center cage )
-5 ton heavy duty off-road jack mounted to bed cage
-2 full spares mounted in bed cage
-3 fire extinguishers mounted throughout entire car ( front, center, and rear bed ).
Over $100k invested into the entire build.
Year: 2017
Ford Raptor F150
Vin: 1FTFW1RG9HFC03413
Miles: 24,000
802A loaded ( sunroof etc ).
The truck is in pristine condition, and was built with no expense spared; this isn"t your typical raptor that most people modify to go overlanding, this is a full blown chase truck build-built by Brenthel Industries in Temecula. The quality of the build and fabrication would cost $100k to replicate in parts + labor excluding the cost of the truck. Currently only 24,XXX miles.
The following upgrades were made to the truck, all built by Brenthel in Temecula:
Suspension:
Baja Kits 3.0 Raptor 4wd Race Kit
-King 3.0 raptor specific coilovers
-King 3.0 raptor specific bypasses up front
-King 2.0 air bumps up front
-Baja kits boxed UCA with Uniball- Full heims
-Baja kits boxed LCA with Full heims
-Baja kits Gusseted spindles
-Deaver race pack leafs
-King 2.5" air bumps
-King 3.0 rear reservoir bypasses
Wheels:
-Method 105 17" beadlocks
-Basically new BFG MT"s; stock size, 35x12.5x17
Performance:
-Alcon big brake kits FRONT AND REAR
-Whipple performance CAI with Tune (+200lb ft of torque)
-Cat back exhaust, stainless mufflers with turn-downs in front of the rear axle.
Appearance:
-Full carbon fiber front fenders and bedsides, wrapped in matte black. Paint underneath is glossy and in good shape.
-Custom red/black metallic paint job
-Rear tire cage with Pro-eagle; carries two spares
-Full dynamat interior all around
-Full DOM roll cage, wrapped in alcantara to match the interior.
-Alcantara headliner
-F150 Platinum front seats (Heated, cooled and massaging)
-PRP Harnesses
-ADD Off Road front and rear bumpers and rock sliders
-Baja Designs ONx6 Light bar in front bumper
-4x Baja Designs LP9"s up front
-2x Baja Designs XL ditch lights with brackets
-full metal skid belly plate
-Rear mounted Baja designs lights
Misc:
-Race radio
-CB radio + megaphone & police sirens.
-Built in air-compressor
-Fully equipped with Lowrance HDS multifunction GPS ( X2 )
( one 16” lowrance HDS mounted on passenger side. one lowrance HDS 7 mounted on center cage )
-5 ton heavy duty off-road jack mounted to bed cage
-2 full spares mounted in bed cage
-3 fire extinguishers mounted throughout entire car ( front, center, and rear bed ).
Over $100k invested into the entire build.