Land Rover Defender Leather (1992)
Sale price: US $36,950.00 Make an Offer
| Used |
| “FRAME OFF RESTORATION. MATCHING NUMBER VEHICLE. ENGINE DOES SMOKE” |
| Year: | 1992 | VIN : | 00000000000000000 |
| Mileage: | 61,000 | Exterior Color: | grey |
| Make: | Land Rover | Interior Color: | Black |
| Model: | Defender | Transmission: | Manual |
| Trim: | Leather | Vehicle Title: | Clear |
| Engine: | 2.5 NA diesel | Options: | 4-Wheel Drive, Leather Seats |
| Drive Type: | 4WD | Fuel Type: | Diesel |
| For Sale By: | Dealer | Sub Model: | Defender |
| Drive Side: | Right-hand drive |
Rye, United Kingdom
Vehicle description
This is a 1992 2.5 NA Diesel Nardo grey soft top
VIN NUMBER SALLDVAC7JA913251 Like many Land Rovers the chassis was starting to show its age so we have carried out a frame off restoration on this Defender. Even though it would have been far easier and cheaper to replace the chassis with a galvanised chassis we decided not to as it is a matching chassis/Vin number/ original engine vehicle. It is an ex MOD Defender 90 so is fitted with the 2.5 naturally aspirated engine. Please note these are not as powerful as TDI or V8 engines and this particular engine does smoke. We can change the engine at additional cost but if it is being exported to USA it is best to have the original engine for customs. . It has had upgraded Bilstein suspension set up to create a far superior driving experience. It has had a full inside and out professional colour change to Nardo grey Below we have separated out the upgrade parts from the restoration work carried out/ parts fitted. Upgrade parts fitted: Full Leather heated LRI low base Corbeaus with diamond quilting Full Leather LRI arm rest cubby box 4X Inward facing diamond stitch rear seats Black leather sun visors Momo steering wheel LRI front carpet set Rear load area rubber matting kit Heavy duty black hood stick set and windscreen top rail kit Black mohair canvas hood with side windows 16" gloss black Nemesis alloy wheel with 265 75 BFG KM2 tyres Full exterior LED light set JW speaker LED headlights Best of British front grille and vent set Smoked side wing repeaters Gloss black wing mirrors Quad DRL heavy duty bumper with fog lights Stainless steel bolt set Ebony SVX style side runner bars
Black textured steering guard Heritage limited edition mud flaps New Genuine Land Rover black badge kit Genuine Land Rover TDCI/PUMA bonnet Bilstein suspension shock set inc steering damper Full vehicle superpro bush kit Stainless steel front carpet retainers Stainless steel rear mat retainer New springs front and rear Aircon style front grille nose cone Restoration work carried out: Investigate engine fault - water in oil. Remove cylinder head, pressure test found a core plug leaking, replace leaking core plug, reface cylinder head. Replace cylinder head with new gaskets. Replace engine oil and filter. (this had to be done twice to flush system,) (The above work has been carried out but as pointed out in the description the engine does smoke)
-Remove body from chassis for chassis work / refitting of body after chassis work -Shot blast chassis, radius arms, axles and chassis mounting brackets -Remove suspension bushes and refit with supplied superpro bushes -Etch prime and paint Axles ,radius arms and suspension brackets -Repair chassis bulkhead out riggers and replace rear x member -Etch prime and paint chassis in satin black 2k top coat -Replace full exhaust system inc. new bushes & u-bolts -Replace fuel tank (labour for swapping over tank fittings) -Clean and prep under body for paint -Paint under body in etch primer and satin black 2k top coat -Strip clean / paint swivel housing and clean and paint rear brakes -Bulkhead foot well repair to O/S lower panel -Replace all suspension / some chassis and all body mounting bolts -Drain fuel system of, replace fuel filter -Pair of new front doors -New door bolts and gaskets -Windscreen rubber seal -New door seals Restoration parts Fitted *More parts may have been fitted than shown on list below. -SUSPENSION/CHASSIS BOLTS -FUEL FILTER - NA/TD 7 -OIL FILTER - NA/TD/TDI/V8 -HEAD GASKET SET - 2.5NA -EXHAUST MOUNTINGS -EXHAUST SYSTEM - 90 2.5NA -FUEL TANK - 90 >WA -REAR CROSSMEMBER FITTING KIT - GENUINE -REAR CROSS MEMBER WITHOUT EXTENSIONS. On site AA or RAC inspections are welcome.
VIN NUMBER SALLDVAC7JA913251 Like many Land Rovers the chassis was starting to show its age so we have carried out a frame off restoration on this Defender. Even though it would have been far easier and cheaper to replace the chassis with a galvanised chassis we decided not to as it is a matching chassis/Vin number/ original engine vehicle. It is an ex MOD Defender 90 so is fitted with the 2.5 naturally aspirated engine. Please note these are not as powerful as TDI or V8 engines and this particular engine does smoke. We can change the engine at additional cost but if it is being exported to USA it is best to have the original engine for customs. . It has had upgraded Bilstein suspension set up to create a far superior driving experience. It has had a full inside and out professional colour change to Nardo grey Below we have separated out the upgrade parts from the restoration work carried out/ parts fitted. Upgrade parts fitted: Full Leather heated LRI low base Corbeaus with diamond quilting Full Leather LRI arm rest cubby box 4X Inward facing diamond stitch rear seats Black leather sun visors Momo steering wheel LRI front carpet set Rear load area rubber matting kit Heavy duty black hood stick set and windscreen top rail kit Black mohair canvas hood with side windows 16" gloss black Nemesis alloy wheel with 265 75 BFG KM2 tyres Full exterior LED light set JW speaker LED headlights Best of British front grille and vent set Smoked side wing repeaters Gloss black wing mirrors Quad DRL heavy duty bumper with fog lights Stainless steel bolt set Ebony SVX style side runner bars
Black textured steering guard Heritage limited edition mud flaps New Genuine Land Rover black badge kit Genuine Land Rover TDCI/PUMA bonnet Bilstein suspension shock set inc steering damper Full vehicle superpro bush kit Stainless steel front carpet retainers Stainless steel rear mat retainer New springs front and rear Aircon style front grille nose cone Restoration work carried out: Investigate engine fault - water in oil. Remove cylinder head, pressure test found a core plug leaking, replace leaking core plug, reface cylinder head. Replace cylinder head with new gaskets. Replace engine oil and filter. (this had to be done twice to flush system,) (The above work has been carried out but as pointed out in the description the engine does smoke)
-Remove body from chassis for chassis work / refitting of body after chassis work -Shot blast chassis, radius arms, axles and chassis mounting brackets -Remove suspension bushes and refit with supplied superpro bushes -Etch prime and paint Axles ,radius arms and suspension brackets -Repair chassis bulkhead out riggers and replace rear x member -Etch prime and paint chassis in satin black 2k top coat -Replace full exhaust system inc. new bushes & u-bolts -Replace fuel tank (labour for swapping over tank fittings) -Clean and prep under body for paint -Paint under body in etch primer and satin black 2k top coat -Strip clean / paint swivel housing and clean and paint rear brakes -Bulkhead foot well repair to O/S lower panel -Replace all suspension / some chassis and all body mounting bolts -Drain fuel system of, replace fuel filter -Pair of new front doors -New door bolts and gaskets -Windscreen rubber seal -New door seals Restoration parts Fitted *More parts may have been fitted than shown on list below. -SUSPENSION/CHASSIS BOLTS -FUEL FILTER - NA/TD 7 -OIL FILTER - NA/TD/TDI/V8 -HEAD GASKET SET - 2.5NA -EXHAUST MOUNTINGS -EXHAUST SYSTEM - 90 2.5NA -FUEL TANK - 90 >WA -REAR CROSSMEMBER FITTING KIT - GENUINE -REAR CROSS MEMBER WITHOUT EXTENSIONS. On site AA or RAC inspections are welcome.