Ford Other (1989)
Sale price: US $3,000.00 Make an Offer
| Condition: | Used | Year: | 1989 |
| VIN : | 1FDPF82K9KVA37799 | Mileage: | 9,999,999 |
| Number of Cylinders: | 8 | Make: | Ford |
| Transmission: | Manual | Model: | Other |
| Body Type: | Cab & Chassis | Engine: | 429 4V |
| Warranty: | Vehicle does NOT have an existing warranty | Drive Type: | RWD |
| Vehicle Title: | Rebuilt, Rebuildable & Reconstructed | Options: | Leather Seats |
| Exterior Color: | White | For Sale By: | Private Seller |
Fort Myers, Florida, United States
Vehicle description
1989 FORD F-800
429 4V Large Snout Forged Steel Crankshaft
Torker Intake Manifold With 2" Open Spacer 780 Holley
+.030 TRW Forged Pistons Iron Top Stainless Oil Rings All Rods Checked
TRW High Volume Oil Pump Moroso Drive Rod 10QT Oil Pan
New"Ford Racing Cam"+Lifters has smooth idle
HEADS: IRON with stellite insert seats (factory)
"Mildly" Ported Bowl and Shortside Smog Bumps Removed
Light Touch to Chamber edges after milling.Valves are Stainless {1600.00 from ford}
Reman WATER PUMP and ALTERNATOR. New POWER STEERING pump
NON SMOG SCHOOL BUS HEADER TYPE EXHAUST MANIFOLDS
3" FLOWPRO MUFFLERS 3" STACKS
13" metal fan type disk Reman Cover New ball bearing pilot brng. new throwout brng.
Main transmission: CLARK 5 SPEED MOD 28V72/D6HR in Very good condition
DANA SPICER 7041 4 Speed AUX has LoLo,Lo,Direct,Overdrive.
Excellent condition with Well made shifter mount and linkage.No noises They do not jump out of gear
Rockwell Int 2 Speed Rear 650/907 has new gearchanger = 40 Possible Forward Gears 8 Reverse
All New U-Joints Forward and Rear Driveshaft. Rear has D.S.Safety Loops. Wheel Base 14"7.
Monroe shocks in front. 12 inch Channel Iron front bumper 3/8 thick Heavy
The radiator is bolted to the frame with heavy angle iron, 6 blade solid drive fan
Electricals are moved onto fire wall.truck is almost ready to drive with fenders and grill removed such as on a farm or yard.
Frame Mount Battery by Wheel on Passenger Side.Has Locking bar with Lock.
Also a cable runs back to the welder and winch.
High Back Grey LEATHER BUCKET SEATS from a dodge charger
No tears No holes minor wear real comfortable.they don"t adjust
40 Channel cb works just needs an antenna
5000# davit crane with electric winch swings around easy.
Will work the holmes cradle/sling
Twenty ton pintle hitch, lower plate for trailer ball
Tool cabnet was first made to fit a 1 ton ford.Self locating,it uses Ford factory frame holes.
It holds a typical roll chest two or three parts w/o the wheels.on driver side.space for pry bars etc hammers and you name it.
On the passenger side it held two large cylinders(one oxy and one co2) a smaller cabnet Propane and hoses grinders on and on.The torch can be left all hooked up.Turn on and use.All locked up and out of sight.It works well Very Handy
It hasen"t been driven long enough to need an oil change after being rebuilt.
Have Clear Title It Runs.
NEEDS SOME BRAKE WORK front was ok metellic disc.the rear started leaking from the pots
Fuel Tank needs to be CLEANED NEW FUEL PUMP BUT CLOGGED With rust
Has been sitting several years owner is disabled
It needs Work to be driven so the buyer will have to tow or haul
MUST PICKUP WITHIN 30 DAYS OF PURCHASE
FEEL FREE TO ASK ANY QUESTIONS
429 4V Large Snout Forged Steel Crankshaft
Torker Intake Manifold With 2" Open Spacer 780 Holley
+.030 TRW Forged Pistons Iron Top Stainless Oil Rings All Rods Checked
TRW High Volume Oil Pump Moroso Drive Rod 10QT Oil Pan
New"Ford Racing Cam"+Lifters has smooth idle
HEADS: IRON with stellite insert seats (factory)
"Mildly" Ported Bowl and Shortside Smog Bumps Removed
Light Touch to Chamber edges after milling.Valves are Stainless {1600.00 from ford}
Reman WATER PUMP and ALTERNATOR. New POWER STEERING pump
NON SMOG SCHOOL BUS HEADER TYPE EXHAUST MANIFOLDS
3" FLOWPRO MUFFLERS 3" STACKS
13" metal fan type disk Reman Cover New ball bearing pilot brng. new throwout brng.
Main transmission: CLARK 5 SPEED MOD 28V72/D6HR in Very good condition
DANA SPICER 7041 4 Speed AUX has LoLo,Lo,Direct,Overdrive.
Excellent condition with Well made shifter mount and linkage.No noises They do not jump out of gear
Rockwell Int 2 Speed Rear 650/907 has new gearchanger = 40 Possible Forward Gears 8 Reverse
All New U-Joints Forward and Rear Driveshaft. Rear has D.S.Safety Loops. Wheel Base 14"7.
Monroe shocks in front. 12 inch Channel Iron front bumper 3/8 thick Heavy
The radiator is bolted to the frame with heavy angle iron, 6 blade solid drive fan
Electricals are moved onto fire wall.truck is almost ready to drive with fenders and grill removed such as on a farm or yard.
Frame Mount Battery by Wheel on Passenger Side.Has Locking bar with Lock.
Also a cable runs back to the welder and winch.
High Back Grey LEATHER BUCKET SEATS from a dodge charger
No tears No holes minor wear real comfortable.they don"t adjust
40 Channel cb works just needs an antenna
5000# davit crane with electric winch swings around easy.
Will work the holmes cradle/sling
Twenty ton pintle hitch, lower plate for trailer ball
Tool cabnet was first made to fit a 1 ton ford.Self locating,it uses Ford factory frame holes.
It holds a typical roll chest two or three parts w/o the wheels.on driver side.space for pry bars etc hammers and you name it.
On the passenger side it held two large cylinders(one oxy and one co2) a smaller cabnet Propane and hoses grinders on and on.The torch can be left all hooked up.Turn on and use.All locked up and out of sight.It works well Very Handy
It hasen"t been driven long enough to need an oil change after being rebuilt.
Have Clear Title It Runs.
NEEDS SOME BRAKE WORK front was ok metellic disc.the rear started leaking from the pots
Fuel Tank needs to be CLEANED NEW FUEL PUMP BUT CLOGGED With rust
Has been sitting several years owner is disabled
It needs Work to be driven so the buyer will have to tow or haul
MUST PICKUP WITHIN 30 DAYS OF PURCHASE
FEEL FREE TO ASK ANY QUESTIONS